|
Light Movers
Light Rail 5
- Adjustable Cross Bar for multiple lights
- "Triple Duty" extruded Aluminum Track
- "Steel on Steel" carrier bearings
- "Sure Grip" dual drive design
- "Solid State advanced Controls" fully integrated PCB circuitry with 0-60 second adjustable time delay
- "High Torque" instrument grade drive motor with "Ball Bearing" output shaft
Designed with the commercial grower and serious home hobbyist in mind, the all new Gualala Robotics Light Rail 5 is clearly ready to work. From the all new "triple duty" extruded aluminum track, super "wide-n-stable" carriage with steel on steel carrier bearings, to the high torque instrument grade drive motor with ball bearing output shaft and " sure grip" dual drive design. The new light Rail 5 is more than capable of moving 2 or 3 lamps, side by side or fore and aft. The all new Light Rail 5 is quite simply the most capable and versatile Light Mover to date from the manufactures of Light Rail Intellidrive 3.5 Best of all, the dependability you've come to expect from Gualala Robotics Inc.
Light Rail 3.5
The Light Rail 3.5 runs by a self-propelled 6 or 10 rpm motor; no pulleys, chains, or gears. Ideal for rectangular growing areas or aquariums. The 6 ft rail can be expanded to 9 ft and has adjustable switch stops to enable various travel lengths. The Light Rail 3.5 Intelli Drive travels at approximately 2 ft per minute. The adjustable Intelli Drive time delay feature enables your lamp to pause at each end of the track for 0-60 seconds. The Add-a-lamp kit allows you to expand the system from 6 ft to 12 ft, moving two reflectors in-line with one motor.
- Adjustable Cross Bar for multiple lights
- "Triple Duty" extruded Aluminum Track
- "Steel on Steel" carrier bearings
- "Sure Grip" dual drive design
- "Solid State advanced Controls" fully integrated PCB circuitry with 0-60 second adjustable time delay
- "HIGH TORQUE" instrument grade drive motor with "Ball Bearing" output shaft
 |
| Item No. |
Description |
Retail |
| LR5-ID4US |
Light Rail 5, 4 rpm Intelli-drive With 8 ft Rail |
349.95 |
| LR3.5-6-SYS |
Light Rail 3.5, 6 rpm Intelli-drive With 6 ft Rail |
222.95 |
| LR3.5-10-SYS |
Light Rail 3.5, 10 rpm Intelli-drive With 6 ft Rail |
222.95 |
| LR3.R |
6 ft Rail only |
24.95 |
| LR3.RX |
3 ft Extender Rail only |
15.95 |
| LR3AL-SYS |
6 ft add-a-lamp pkg. Includes rail, pushrod, trolley & hardware |
59.95 |
| LR3.5RB |
Robo-Stick lamp stabilizer |
31.95 |
| LR3.5-6 |
6 rpm Intelli-drive motor w/0-60 sec Time delay |
208.95 |
| LR3.5-9 |
10 rpm Intelli-drive motor w/0-60 sec Time delay |
208.95 |
| LR3DWOR-KIT |
Drive wheel O-ring Kit ( tension spring, O-ring, Nut, Bolt) |
8.95 |
| LR3TW-KIT |
Trolley wheel replacement kit |
5.95 |
| LR3S |
Thumb screws /stops for LR 3.5 |
1.75 |
| LR3-TS |
Trolley Slave |
22.95 |
|  |
 |
 |
 |
|