CT-DH-1 - Cooling and Dehumidifying Controls - Integrated Outlets

The CT-DH-1 is designed to turn "on" exhaust and/or intake fans to remove excess or unwanted heat and humidity. Set your desired temperature and humidity using the dials. Internal sensors will allow a 7°F temperature comfort zone (3°F with an external coil or remote bulb) and a 5% humidity span (differential) between the time the fans activate for cooling or dehumidifying and then turn "off" again. Plug-in and control circulation fans, exhaust fans, cooling systems, or dehumidifiers. The outlets on the CT-DH-1 are integrated, so that when either the temperature or humidity settings are exceeded, all four will activate, turning "on" equipment plugged into any of the four outlets.

The CT-DH-1 operates on 120V AC with 15A maximum switching capacity and is intended for indoor use only. Be sure to locate your atmospheric controller where it will accurately sample and respond to the average air conditions. Good air circulation around the controller and in your garden space is essential. Avoid locating the controller in a draft or in direct sunlight.

	Item No. Description Retail CT-DH-1 Intergratred cooling Thermostat & dehumidisat / 4 outlets $185.00